Laboratory Chambers

Photo Stability Chamber

Photo Stability Chamber

Approx. Rs 3 Lakh / Unit


Photo stability chamber is engineered using latest techniques and following international industrial standard. These are fitted with Audio Visual Alarm if the temperature and deviates from the set Temperature, to ensure effective usage. Its stainless steel perforated trays make these extensively useful. For proper circulation, these devices have chamber blowers for uniformity of temperature under loaded.

Model
Name of the EquipmentLABTOP® Micro controller (PID) based Photo Stability Chamber
Air Circulation"Chamber blowers to have uniformity of temperature under loaded Condition"
Alarm"Audio Visual Alarm if the temperature deviates from the set Temperature"
TraysStainless Steel perforated trays.
LightingInterior illumination for working area
Insulation3” Thick CFC free PUF Insulation.
Heating SystemU shaped S.S. Nichrome wire air heaters
Observation DoorInside see through unbreakable acrylic door
Refrigeration SystemHermetically Sealed CFC Free Emerson Compressor with R- 134a refrigerant having state of art by pass system for continues run of compressor
Humidity System"Non condensing type steam injection system with water level arrangement with insulation to save heat energy."
Control System"Precise control of temperature and humidity by using CE Approved micro controller based PID controller (Auto tuning type)"
Validation Port50 mm validation Port with silicon rubber seal to insert sensors for validation purpose
PowerWorks on 230 V AC single phase 50Hz
OtherCastor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
Safety Features"1. Float switch to cutoff the mains supply in case of low water level in the boiler tank"

"2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature"

"3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor."
CertificationsISO 9001: 2008 , ISO 13485 : 2012 and CE
Documentations"LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"


Specifications
Temperature Range20° C to 60° C
Temperature Accuracy± 0.2° C
Temperature Uniformity± 2° C
Humidity Range40% RH to 98% RH
Humidity Accuracy± 2% RH.
Humidity Uniformity± 3% RH.
Photo Stability EffectFluorescent tubes for day light effect and U.V. tubes for ultra-violet rays in accordance to ICH guidelines requirement of lightning Energy
Timer99 Hrs Programmable Micro Controller Based Cyclic Timer for regulating illumination condition
Standard Models: Inner Stainless steel 304, 0.8 mm & Outer mild steel,1.0 mm powder coated

Stability Testing Chamber

Stability Testing Chamber

Approx. Rs 3 Lakh / Unit


We are renowned manufacturers and suppliers of Stability Testing Chamber that is designed for carrying out several stability as well as shelf life studies of specimens of drugs, seeds. And a wide array of substances and are extensively used in diverse industries. These incorporate state of the art airflow system to maintain homogeneous temperature and humidity and ensure low energy consumption and thermal stability with PUF insulation. It features eco friendly compressor as well as refrigeration system for seamless performance.

Cat. No.LSC-100
LSC-100/G*
LSC-200
LSC-200/G*
LSC-300
LSC-300/G*
LSC-400
LSC-400/G*
LSC-600
LSC-600/G*
Temperature20-60 DegreeC20-60 DegreeC20-60 DegreeC20-60 DegreeC20-60 DegreeC
Accuracy+-0.2 DegreeC+-0.2 DegreeC+-0.2 DegreeC+-0.2 DegreeC+-0.2 DegreeC
Uniformity2 DegreeC2 DegreeC2 DegreeC2 DegreeC2 DegreeC
Humidity40-98%40-98%40-98%40-98%40-98%
Accuracy+-2%+-2%+-2%+-2%+-2%
Uniformity3%3%3%3%3%
Volume100 liters200 liters300 liters400 liters600 liters
Inside Dia. (WxDxH) cms.43x40x6050x40x10056x45x12063x53x12072x65x130
Outer Dia. (WxDxH) cms.58x72x12965x72x16971x77x18978x85x18987x97x192
No. of TraysTwoThreeFourFourFour
Operating Voltage230 V AC230 V AC230 V AC230 V AC230 V AC

PLC Controlled Photo Stability Chamber

PLC Controlled Photo Stability Chamber

Approx. Rs 95,000 / Piece


PLC controlled photo stability chamber is engineered using best available techniques and following international industrial standard. These are fitted with high quality chamber blowers for uniformity of temperature under loaded condition. Besides, these are straightened with Stainless Steel perforated trays for effective usage. These are properly designed with interior illumination for working area. These can be availed in various technical specifications and range.

PLC Controlled Stability Test Chamber

PLC Controlled Stability Test Chamber

Approx. Rs 3.8 Lakh / Unit


PLC controlled stability test chamber is designed as per international industrial standard and using high quality components. These are featured with programmable logic control with safety controller, auto changeover of standby systems and other event managements with 3.8” color HMI with touch screen and Ethernet connectivity to ensure longer functional life and effective usage. These are compact in size and extensively recommended by clients owing to its various adjustable arrangements and longer service life.

Walk-In-Chamber

Walk-In-Chamber

Approx. Rs 2.4 Lakh / Unit

  • Prefabricated modular type construction with high density CFC free PUF insulation

  • A safety alarm system is provided in case of any emergency
  • Chambers are available in standard size and also custom made to suit your requirement
  • Technical Specification

  • Cate. No.LSC -3375/ G*LSC -8000/ G*LSC -12500/G*LSC -18750/G*LSC -22500/G*
    Volume3375 ltrs.8000 ltrs.12500 ltrs.18750 ltrs.22500 ltrs.
    Inner Size (WxDxH) mtrs.1.5X1.5X1.52.0x2.0x2.02.5x2.5x2.02.5x3.0x2.53.0x3.0x2.5
    Outer Size (WxDxH) mtrs.1.66x2.46x1.662.16x2.96x2.162.75x3.50x2.162.75x3.96x2.753.16x3.96x2.75
    Temperature20 to 60 °C.20 to 60 °C.20 to 60 °C.20 to 60 °C.20 to 60 °C.
    Accuracy± 0.2 °C± 0.2 °C± 0.2 °C± 0.2 °C± 0.2 °C
    Humidity Rh %40 to 95 %40 to 95 %40 to 95 %40 to 95 %40 to 95 %
    Accuray± 2 °C± 2 °C± 2 °C± 2 °C± 2 °C
    Uniformity± 3°C± 3°C± 3°C± 3°C± 3°C
  • Display of set value and process value.



  • Additional Information:

    Photostability Test Chambers

    Photostability Test Chambers

    Labtop Photo Stability Test Chambers are designed to provide high intensity lighting system to comply with ICH guidelines for photo stability conditions with white fluorescent exposure of 1.2 million LUX hours and ultra violet energy exposure of 200W hours/sq. meters. LABTOP chambers conform to international standards such as ICH, WHO Guideline, and USFDA requirements. Printer interface for LUX & UV meter, automatic shut off after specified exposure level.

    Technical Specifications
    Cat. No.LPC-100
    LSC-100/G*
    LPC-200
    LPC-200/G*
    LPC-300
    LPC-300/G*
    LPC-400
    LPC-400/G*
    LPC-600
    LPC-600/G*
    Cat. No.LPC-800
    LPC-800/G*
    LPC-1000
    LPC-1000/G*
    LPC-1500
    LPC-1500/G*
    LPC-2000
    LPC-2000/G*
    ------

    Technical specifications for the above catalogue numbers as per Stability Test Chamber.

    PLC Controlled Walk-In-Stability Test Chamber

    PLC Controlled Walk-In-Stability Test Chamber

    Approx. Rs 3.8 Lakh / Unit


    PLC controlled walk-in-stability test chamber is engineered with high quality control system which is technically programmable logic control with safety controller and also have auto changeover standby systems and other event managements with 3.8” Color HMI with touch screen and Ethernet connectivity. These are precisely engineered with U shaped S.S. nichrome wire air heaters for proper heating. Besides, its unbreakable acrylic door makes these extensively durable and reliable.
    Model
    Name of the EquipmentLABTOP® PLC based Walk-in-Cooling Incubator
    Control System"Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 3.8” Color HMI with touch screen and Ethernet connectivity"
    Air CirculationBlowers to have uniformity of Temperature under loaded condition.
    AlarmAudio Visual Alarm if the temperature deviates from the preset temperature
    LightingInterior illumination for working area.
    Insulation80mm Thick CFC free PUF Insulated modular cabinet
    Heating SystemU shaped S.S. Nichrome wire air heaters.
    Observation DoorInside see through unbreakable acrylic door
    Refrigeration System"Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor"
    PowerWorks on 230/430 V AC single / three phase 50Hz
    OtherMCB, Heavy duty latch with lock & key.
    Safety Features"1. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.

    2.180 Sec. compressor ‘ON’ delay timer to safe guard the compressor."
    CertificationsISO 9001: 2008 and ISO 13485 : 2012
    Documentations"LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports"

    Plant Growth Chamber

    Plant Growth Chamber

    Approx. Rs 1 Lakh / Unit

    Plant growth chamber is engineered using high quality stainless steel and other allied metals. These are designed with proper illumination for working area. Owing to its robust construction and application specific design, these devices are extensively used for various industrial applications. These are straightened with U shaped S.S. nichrome wire air heaters for proper heating functions. Besides, its refrigeration system is hermetically sealed CFC free danfoss/emerson compressor with R 134a refrigerant having state of art By pass system for continues run of compressor, which make these highly effective.

    Additional Information:

    PLC Controlled Plant Growth Chamber

    PLC Controlled Plant Growth Chamber

    PLC controlled plant growth chamber is engineered using best quality components and following international industrial standard. These are designed with two chamber blowers to have uniformity of Temperature under loaded condition, to ensure proper air circulation. Fitted with high quality stainless steel, these devices ensure effective usage. Besides, for proper insulation, these are packed with 3” thick CFC free PUF insulation. For safety purpose, these are fitted with float switch to cutoff the mains supply in case of low water level in the boiler tank.

    ModelName of the EquipmentLABTOP PLC controlled (PID) based Plant Growth ChamberControl SystemPLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” color HMI with touch screen, USB printing port and Ethernet connectivityAir Circulation"Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"AlarmAudio Visual Alarm if the temperature deviates from the preset temperatureTraysStainless Steel perforated trays.Insulation3” Thick CFC free PUF Insulation.Heating SystemU shaped S.S. Nichrome wire air heaters.Observation DoorInside see through unbreakable acrylic doorRefrigeration SystemHermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.Humidity SystemNon condensing type steam injection system with water level arrangement with insulation to save heat energy.Validation Port50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.PowerWorks on 230 V AC single phase 50HzOtherCastor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.Safety Features1. Float switch to cutoff the mains supply in case of low water level in the boiler tank.

    2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.

    3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.CertificationsISO 9001: 2008 , ISO 13485 : 2012 and CEDocumentations"LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"

    X
    Provide Us More Details
    Purpose of Requirement:

    Reselling End Use Raw Material

    X

    Looking for Laboratory Chambers ?

      country-ico

      We will contact you soon !

      Byju C. George

      (CEO)

      Labtop Instruments Private Limited

      Vasai East, Mumbai, Maharashtra, India

      More Categories

      View All Categories »
      Send SMS
      Contact Us